Key Features & Benefits – EPMAN weld-on aluminum fuel filler neck, silver, 1.0" (25.4mm)
The EPMAN weld-on aluminum fuel filler neck, silver, 1.0" (25.4mm) is designed to be welded into a tank wall so you can place the fill point where your layout needs it. It can be used on custom fuel tanks, water tanks, coolant reservoirs, and other fabricated metal tanks.
The body is 6061-T6 aluminum, sealed by a screw cap with a rubber sealing ring. The cap has a knurled edge for grip, and the unit is a non-vented design.
When is this useful?
It fits builds where you want a compact, sealed weld-in fill point and need the 25 mm neck OD to match your hose or tube routing, while keeping cap access predictable.
Technical specs
- Product code: EPYXG200M10SL
- Material: 6061-T6 aluminum
- Design: weld-on filler neck, screw cap, rubber sealing ring
- Type: non-vented
- Color: silver cap
- Neck OD: 25 mm (1.0")
- Neck ID: 14.0 mm
- Length with cap: 32 mm
Selection & installation tips
- Hose/tube match: Match the 25 mm neck OD to your hose/tube and clamp choice.
- Flow check: Compare the 14.0 mm neck ID to the rest of your filler path to avoid an unwanted restriction.
- Packaging: Confirm clearance for the 32 mm length with cap so the cap stays accessible.
- Venting plan: Because it is non-vented, plan tank venting separately within your system design.
- Weld fit-up: Dry-fit the orientation so routing does not preload the joint after welding.
Before welding, verify your hose/tube size, cap clearance, and venting strategy, then compare them to the listed OD/ID and the length-with-cap dimension.
