Our Interior & Exterior Trim Decor range lets you refresh your cabin and small exterior details with model-specific frames, inserts and bezels. Highlight switches, screens and air vents using carbon-look overlays or moulded covers. Most parts install quickly with adhesive or clip-on mounts, requiring minimal modification to the vehicle.
Net price: 20 €
Net price: 8 €
Net price: 17 €
Net price: 26 €
Net price: 10 €
Net price: 19 €
Net price: 17 €
Net price: 37 €
Net price: 19 €
Net price: 21 €
Brief Summary & Key Benefits
The Interior & Exterior Trim Decor line refines OEM looks with cohesive styling. Carbon-look frames, inserts and rings emphasise dashboards, centre consoles and air vents, while helping to protect surfaces from light scratches. Most parts are model-specific for quick fitment and easy return to stock. Benefits include low weight, straightforward installation and fast visual impact.
Technical Basics
Two constructions are common. Thin overlay covers (carbon-wrap style) use ABS or PC-ABS with laminated film and adhere to the OEM panel via pre-applied acrylic foam tape. Moulded covers have contoured edges that locate around bezels and switches. Expect 0.2–0.8 mm added thickness; always verify clearance near moving parts. Proper bonding requires degreasing with isopropyl alcohol and allowing 24 hours for the adhesive to cure. Low temperature or dusty surfaces are typical pitfalls that lead to lifting.
Materials include ABS, PC-ABS and occasionally real carbon veneer or hydro-graphics. Operating ranges around –20…+60 °C are typical; on heat-soaked areas (e.g., under the windscreen) take extra care during application. Foam tape also damps vibration and helps distribute loads across textured plastics.
Selection Criteria
First confirm exact model/year compatibility (body code, facelift). Small differences in button count or screen aperture size can exist—compare photos and details. Next choose finish: matte, satin or gloss carbon pattern to match your cabin. Then decide on mounting: pre-taped adhesive overlays for quick installs, or clip-on frames for repeated removal. For exterior pieces, prioritise UV resistance and weatherproof bonding.
Plan your theme: keep textures and colours consistent across dashboard and door cards. Subtle contrast works for sporty builds; for understated looks, matte carbon close to the OEM black trim blends well. Order sets when possible to maintain uniform geometry and shade.
Installation & Maintenance
Clean, then degrease with IPA. Test-fit dry, remove the liner and press from the centre outward to vent air and stress. Avoid washing and large temperature swings for 24 hours to allow full cure. For clip-on parts, ensure all tabs engage evenly to prevent stress points.
For cleaning, use a soft microfibre cloth and neutral-pH cleaner. Avoid abrasives and harsh solvents that could dull the finish. If chips or peel appear, replace the single piece to preserve a uniform look. In cold weather, minimise load on freshly installed parts until the adhesive has fully set.
FAQ
Q: How durable is the carbon-look finish?
A: With proper surface prep and curing, interior use is long-lasting. Avoid aggressive chemicals and abrasion.
Q: Can I remove the parts without damage?
A: Yes—gentle heat softens the adhesive. Remove residue with a suitable adhesive remover.
Q: Will it affect button operation?
A: Only if added thickness reduces clearance. Always test-fit and check free movement before final bonding.
Q: Are they suitable for exterior use?
A: Some frames are, but ensure UV-resistant tape and weatherproof adhesion; clean regularly.
Q: Do I need extra glue?
A: Most pieces include foam tape. Apply on clean, dry surfaces at 15–25 °C for best bond strength.
