Stainless Steel Elbow 90 Degree - 42mm
Stainless steel 90deg elbow section with 42 mm diameter and 2 mm wall thickness for universal piping in intake and exhaust systems. Useful when you need a compact direction change and want to match the joint method and connectors to your setup.
Net price: 5 €
Key Features & Benefits – Stainless steel elbow 90deg 42 mm
The Stainless steel elbow 90deg 42 mm is a stainless steel elbow section with a 90-degree bend and 42 mm diameter. It suits universal piping work in intake and exhaust systems.
With 2 mm wall thickness and a 90deg turn, it helps connect straight runs where packaging is tight and you want a clean bend without forcing alignment at the joints.
When is this useful?
It fits custom routing where a 90-degree turn is required, and you plan the end preparation to suit your preferred welded or clamped connection.
Technical specs
- Type: 90deg elbow
- Diameter (D): 42 mm
- Wall thickness: 2 mm
- Material: stainless steel
Selection & installation tips
- Diameter definition: confirm whether 42 mm needs to match OD or ID in your joint, then choose the correct coupler/clamp.
- Clearance check: verify space around the bend so it will not touch nearby parts under movement and vibration.
- Joint plan: decide on welded vs clamped joints first and prepare the ends accordingly.
- Dry-fit orientation: rotate and align the elbow during a dry fit so the axes and angles match your intended routing.
- Mating surfaces: clean the joint areas before assembly so the connection seats properly and stays aligned.
Before final assembly, verify your required dimensions and packaging against the specs above, and match your connectors and joining method to those parameters.
Net price: 5 €
