Key Features & Benefits – Red Line Liquid Assembly Lube engine assembly lube 355 ml

Red Line Liquid Assembly Lube engine assembly lube 355 ml is an assembly lubricant designed to leave a protective film on wear surfaces until the first start.

Compatible with all engine oils, and designed to avoid clogging the oil filter after initial start-up while keeping application clean and even during assembly.

When is this useful?

Useful for engine builds and rebuilds where you want critical areas to have a stable, oil-friendly lubricating film until oil pressure is fully established.

Technical specs

• Type: liquid engine assembly lube
• Pack size: 355 ml (12 oz) bottle
• Compatibility: compatible with all engine oils
• Filter-friendly: designed not to clog the oil filter after first start
• Use areas: camshafts, lifters/followers, pistons, bearings, threads
• Not recommended: exhaust fasteners and other high-heat hardware

Selection & installation tips

• Surface prep: clean and degrease surfaces before assembly, then apply a thin, even film.
• Correct application points: use only where engine oil lubrication is expected; for hot-side fasteners use a dedicated anti-seize product.
• Film thickness: ensure continuous coverage without over-applying, especially on bearings and valvetrain parts.
• First start procedure: prime/prepare the lubrication system per engine builder or manufacturer practice to build oil pressure quickly.
• Stored parts: if parts were stored before assembly, re-check cleanliness and refresh the coating if needed.

Verify the application point is engine-oil lubricated, then match the 355 ml pack size and the listed use areas to your build plan.