Epman oil filter stand adapter M18x1.5
M18x1.5 thread Epman oil filter stand adapter for an aftermarket oil cooler sandwich plate, allowing the plate to sit behind the factory oil filter. Steel construction with a male/female adapter-style design. Sandwich plate not included.
Net price: 2 €
Key Features & Benefits – Epman oil filter stand adapter M18x1.5
The Epman oil filter stand adapter M18x1.5 is a male/female adapter intended for aftermarket oil cooler sandwich plate setups. It can be used with sensor pass-through stands and with channel-type oil cooler connections.
Aluminum construction in a compact form factor. This product family is available in multiple thread types, and this page covers the M18x1.5 version.
When is this useful?
It is useful when you are adding a sandwich plate and need the center thread to match your engine’s oil-filter mount so the plate seats correctly and the oil filter tightens down as intended.
Technical specs
- Thread: M18x1.5
- Material: Steel
- Finish: Zinc plated (yellow passivated)
- Overall length: 44 mm
- Outer diameter: 24 mm
- Sections: 7 mm + 20 mm
Selection & installation tips
- Thread check: confirm your oil-filter mount is truly M18x1.5 before choosing this adapter.
- Sandwich plate center connection: verify the sandwich plate’s center interface matches this adapter style and thread.
- Clearance: compare the 44 mm overall length and 24 mm outer diameter with available space (filter, subframe, lines).
- Sealing faces: clean mating surfaces and ensure the sandwich plate seal is undamaged and evenly seated.
- Leak check: after first start, inspect all joints at idle and near operating temperature.
Before final assembly, verify thread size, sealing faces, and installation space on your own setup, then compare the sandwich plate and oil filter connection details to the specs listed above.
Net price: 2 €
