Key Features & Benefits – 20L black aluminum fuel tank with built-in sensor
The 20L black aluminum fuel tank with built-in sensor is compact and integrates easily into setups using AN10 fittings and AN10 fuel lines. It’s suited to racing and modified vehicles where packaging and hose routing matter.
The built-in level sender reads 10 Ohm (empty) and 100 Ohm (full), so sender-to-gauge compatibility can be checked up front. The tank has a dual AN10 outlet, and the set includes 2 AN10 plugs and 2 AN10 connectors.
When is this useful?
Use it when you need a compact 20L tank with level indication and you’re building around AN10 hose routing, including planning separate feed and return lines from the dual outlets.
Technical specs
- Capacity: 20 liters
- Material / color: aluminum, black
- Dimensions: 30.5 × 31 × 21.5 cm
- Sender (empty / full): 10 Ohm / 100 Ohm
- Fittings included: AN10 welded fittings; 2 AN10 plugs; 2 AN10 connectors
- Outlet: dual AN10 outlet
Selection & installation tips
- Space check: confirm mounting space and leave room for fittings, hose bends, and service access alongside the 30.5 × 31 × 21.5 cm body size.
- AN10 system match: verify your hoses and fittings are AN10, and plan how you’ll use the dual outlets (for example feed/return routing).
- Sender compatibility: ensure your gauge/ECU supports a 10–100 Ohm sender, and use solid grounding during wiring.
- Port sealing: cap any unused AN10 port with the included AN10 plug and keep sealing surfaces clean during assembly.
- Mounting: use secure mounts with vibration isolation, then do an initial low-volume fill to verify the system is leak-tight.
Before installation, verify available space, fitting orientation, AN10 system sizing, and 10–100 Ohm sender compatibility, then compare everything to the technical specs listed above.
