Key Features & Benefits – Stainless steel straight pipe 34 mm 1 m
The Stainless steel straight pipe 34 mm 1 m is a straight tube section made from SS304A2 stainless steel. It is suitable for building intake and exhaust systems.
With a 34 mm diameter, 1000 mm overall length and 1.5 mm wall thickness, it works as a clean base piece when you need to cut to length and integrate an aligned straight run using your preferred joining method.
When is this useful?
It fits custom builds and repairs where you need a stable straight section that you can adapt to the available space and the connectors used in your piping layout.
Technical specs
- Form: Straight
- Diameter (D): 34 mm
- Overall length: 1000 mm
- Wall thickness: 1.5 mm
- Material: SS304A2 stainless steel
Selection & installation tips
- Diameter definition: confirm whether your joint needs the tube OD or ID, then choose the correct coupler, clamp, or adapter.
- Wall thickness check: account for 1.5 mm thickness when flaring, welding gap setup, or using sleeves.
- Length planning: mark cut lines after a dry fit and leave a small margin for final alignment.
- Joint strategy: decide on clamped vs welded connections first and prep the ends to match.
- Routing & clearance: verify nearby clearances and set the axis during a dry fit so the system is not preloaded.
Before final assembly, verify your required dimensions and packaging, then match diameter, length, wall thickness, and material to the specs above.
