The offered strengthening of the front sockets have been designed for the BMW E36 model. They were designed to stiffen the elements that transfer the highest loads during the operation of the front suspension, which can bend during dynamic driving or taking sharp bends, changing the geometry of the vehicle.
The reinforcements effectively stiffen the arrangement between the front knobs and the front fender aprons. Thanks to welding in our set, the sensitive elements are not only strengthened, but also effectively eliminate the "floating" of the front cups, which additionally translates into better driving properties of the E36 model.
Reinforcements are also effective in preventing convexes from knocking out when hitting unevenness or cavities in the road. The sheets have a special finish of the front part in the form of a double folded sheet at 180 degrees and a rear bend at 90 degrees for even better reinforcement of these elements. The tiles have cut holes in a unique shape, which further enhance the visual effect and give it a sporty character.
The elements have been designed in such a way that they can be welded without any additional modifications to the sockets or aprons of the front wheel arches, at the same time enabling the installation of all original elements and providing access to the wiring harness both on the left and right side of the vehicle.
The plates have the largest possible support surface, and thus the forces acting on the sensitive elements are transferred to the adjacent walls.
The product is intended both for civil cars which, due to the passage of time, require stiffening of the original elements, as well as for tuning purposes, to prevent their damage during intensive use during sports driving or Drift, KJS, 1 / 4mili, Time Attack competitions, etc.
S355 steel, 2 [mm] thick
raw steel
for welding
Set contains:
- 2 pcs of strengthening plates
Strengthening the front cups dedicated to:
- BMW E36 Sedan
- BMW E36 Coupe
- BMW E36 Convertible
- BMW E36 Estate
- BMW E36 Compact
