The price applies to a set for one axle without screws. 15mm thick spacers per side with centering flange. Product description:
- material - PA6 duralumin
- distance thickness - 15mm per side (30mm per axis)
- hole / flange diameter - 57.1mm
- hole spacing - 4x108mm
- depth of centering hole in the distance - 16mm
- screws:
- Wheel bolt M12x1.25 40mm Cone
- Wheel bolt M12x1.5 40mm Ball
- Wheel bolt M12x1.5 40mm Cone
- Wheel bolt M14x1.5 40mm Ball
- Wheel bolt M14x1.5 40mm Cone
- screw hardness 10.9
The spacers match:
Audi 100 I4 1.8 1984-1991 Audi 100 I4 2.0 1991-1991 Audi 100 I4 2.4D 1991-1991 Audi 100 I5 2.0 1984-1989 Audi 100 I5 2.0 D 1984-1989 Audi 100 I5 2.0 TD 1984-1989 Audi 100 I5 2.2 1984-1991 Audi 100 I5 2.2 Quattro 1985-1991 Audi 100 I5 2.2 Turbo 1986-1989 Audi 100 I5 2.3 1986-1989 Audi 100 I5 2.3 Quattro 1986-1989 Audi 100 I5 2.4 D 1989-1991 Audi 100 I5 2.5TDI 1991-1991 Audi 100 ND All Trims 1968-1981 Audi 100 V6 2.8 1991-1991 Audi 80 1Y 1.9D 1989-1991 Audi 80 1Z 1.9TDi 1991-1996 Audi 80 3A 2.0E 1988-1990 Audi 80 6A 2.0E 16V 1990-1991 Audi 80 AAH 2.8E 1991-1996 Audi 80 AAZ 1.9TD 1991-1996 Audi 80 ABB 1.6E 1990-1991 Audi 80 ABC 2.6E 1991-1996 Audi 80 ABK 2.0E 1991-1996 Audi 80 ABM 1.6 1991-1996 Audi 80 ABT 2.0 1991-1996 Audi 80 ACE 2.0E 16V 1991-1996 Audi 80 ADA 1.6E 1991-1996 Audi 80 DZ 1.8E 1987-1991 Audi 80 JK 1.6D 1987-1989 Audi 80 JN 1.8 S 1987-1991 Audi 80 NG 2.3E 1991-1996 Audi 80 RA 1.6TD 1987-1991 Audi 80 RN 1.6 1987-1991 Audi 80 RU 1.8 1987-1990 Audi 80 SE 1.4 1987-1988 Audi Cabriolet I4 1.8i 1991-2000 Audi Cabriolet I4 1.9TDi 1991-2000 Audi Cabriolet I4 2.0E 1991-2000 Audi Cabriolet I4 2.0i 1991-2000 Audi Cabriolet I5 2.3E 1991-2000 Audi Cabriolet V6 2.6i 1991-2000 Audi Cabriolet V6 2.8i 1991-2000 Audi Coupe I4 1.6 1985-1988 Audi Coupe I4 1.8 1985-1988 Audi Coupe I4 2.0i 1989-1996 Audi Coupe I5 1.9 1985-1988 Audi Coupe I5 2.0 1985-1988 Audi Coupe I5 2.1 1985-1988 Audi Coupe I5 2.2 1985-1988 Audi Coupe I5 2.3 1985-1988 Audi Coupe I5 2.3i 1989-1996 Audi Coupe I5 2.3i 20V 1989-1996 Audi Coupe V6 2.6i 1989-1996 Audi Coupe V6 2.8i 1989-1996
Our distancers are made of PA6 duralumin roller, which makes them very durable and lightweight at the same time, which makes them also great for riding on the track. Both the hole and the centering flange are created with a tolerance of up to 0.05 mm, which ensures accurate centering of the wheel and prevents the occurrence of vibrations on the steering wheel that occur when the rim is not properly aligned. Screwed on spacers are also made of duralumin with pressed knurled pins or steel threaded sleeves, which prevents thread breakage. Both pins and sleeves are secured against being pulled out when tightening the wheel by their two-stage shape. The advantage of the distances is the increase in the track width, thanks to which the car behaves better when cornering, and also looks better because the wheels are not hidden in the fenders. Thanks to the use of spacers, we can mount rims with other parameters such as larger offset (ET), because we level the difference precisely through the spacers. You can also use spacers that change the spacing of the bolts, which allows you to install rims from another car with the same number of fixing bolts.
