SPAL Slim Electric Pusher Fan 9" (225 mm) – 1140 m³/h

Key Features & Benefits – SPAL Slim Electric Pusher Fan 9" (225 mm)

The SPAL Slim electric pusher fan 9" (225 mm) is the VA07-AP7/C-31S 12V axial fan with 1140 m³/h airflow. Its pusher configuration is intended for installations where the fan moves air toward and through the heat exchanger.

The fan has a 225 mm blade diameter and an 8.3 A current draw. The 9" designation identifies its size class, while 225 mm is the actual blade diameter, so these figures should not be interpreted as a direct inch-to-millimetre conversion.

When is this useful?

The pusher configuration is used when the fan is positioned in front of the radiator or other heat exchanger and moves air through the core. When selecting the fan, the actual dimensions and required airflow direction should be checked rather than relying on the nominal 9" designation alone.

Technical specs

• Model: VA07-AP7/C-31S
• Configuration: pusher, blowing
• Supply voltage: 12V
• Size class: 9"
• Blade diameter: 225 mm
• Airflow: 1140 m³/h
• Current draw: 8.3 A

Selection & installation tips

• Model identification: check the VA07-AP7/C-31S marking on the fan because the VA07 family includes different motor and performance variants.
• Airflow direction: verify that the cooling layout requires a pusher fan and that it will be positioned on the correct side of the heat exchanger.
• Dimensions: do not treat the 9" designation as an actual 228.6 mm blade diameter; this version has a 225 mm blade diameter.
• Mounting: verify the complete fan dimensions and mounting points against the available installation space.
• Electrical system: verify the 12V supply and ensure the wiring, fuse protection and switching arrangement are suitable for the 8.3 A current draw.

Before installation, verify the VA07-AP7/C-31S model, 225 mm blade diameter, pusher airflow direction, mounting dimensions and 12V electrical system and compare them with the listed technical specifications.