Renault performance intake systems (airbox kits) are model-specific intake-side assemblies that replace part or all of the factory route to organise the air path, filter position and pipe layout.
The current range is focused mainly on Clio, Clio RS and Mégane/Scénic applications, so on Renault builds fitment, model year and sensor layout matter more than the model name on its own. Before ordering, always check the product card for connection points, engine version and listed applications.
Verify exact dimensions and specifications on the product card; in-stock items dispatch fast within the EU.
Net price: 178 €
Net price: 156 €
Net price: 98 €
Net price: 464 €
Net price: 78 €
Renault Performance Intake Systems & Airboxes: Model-Tuned Intake-Side Solutions
In this Renault range you will find model-tuned intake-side systems and airbox solutions where pipe routing, filter position and connection layout decide how cleanly the kit fits the engine bay. The current selection is centred mainly on Renault Clio 1.4/1.6, Clio RS 2.0 and Mégane or Scénic 1.6–2.0 applications, so checking the exact year and engine version is especially important before you compare products.
Technical background and system integration
System role: A complete intake system is more than a pipe and a filter. Tube material, bend geometry, mounting points and whether the kit uses a more open or more enclosed layout all influence sealing integrity, thermal movement control and the protection of nearby components.
Packaging: A Clio 1.4/1.6, a Clio RS 2.0 and a Mégane or Scénic 1.6–2.0 engine bay can demand different installation logic. That is why MAF or IAT position, breather routing and clearance to surrounding trim or moving parts all deserve attention before final tightening.
- Pipe route: Bend direction and length affect how naturally the system sits without preload and how much clearance remains around nearby parts.
- Filter position: Open-filter and enclosed airbox layouts can differ not only in access, but also in how neatly they package in the engine bay.
- Connections: Sensor housings, auxiliary ports and joining sections often decide whether a system installs cleanly and stays easy to service.
How to choose the right one
Quick selection guide: Start with the exact Renault model, year and engine, then use the product card to confirm whether the kit is listed for Clio, Clio RS or Mégane/Scénic applications. In this category, listed compatibility, sensor layout and routing detail matter more than the broad model name alone.
Engine version: The 1.4, 1.6 and 2.0 applications can differ in connection layout, available space and engine-bay route, so it is not enough to choose only by Clio or Mégane naming. Check whether the product card includes clamps, brackets and the required joining parts.
Comparison path: If you want a wider view first, it helps to narrow the main Performance Intake Systems & Airboxes range by Renault applications, then return to the brand-specific product cards.
Installation and failure-prevention tips
Preparation: Dry-fit the sections before final tightening and check clamp seating, sensor orientation and engine-bay clearance. Degrease using a manufacturer-recommended cleaner, then allow to dry completely before applying load/boost. Final tightening is best done only once the full route sits in place without side-loading the joints.
Common issue: The most typical problem is a coupler that is not fully seated behind the bead or a pipe section that rotates slightly during final tightening; this can lead to unmetered air, unstable idle or an unusual intake note. You can prevent it by aligning the full route before the clamps are finally tightened and by making sure the system is not left in side-stress at any point.
Post-check: After the first drive, inspect clamps, brackets and loom clearance, especially where the pipe runs close to a fan shroud, lamp housing or inner wheel-arch area. A second inspection after cooldown often prevents later rework and fault-finding.
PRO TIP: On Renault applications, the exact engine and the fitment list on the product card usually matter more than the first model name you notice in the product title.
How do I know this system fits my Renault?
Match the exact model year, engine and the application list shown on the product card. This is especially important on Clio, Clio RS and Mégane/Scénic applications, where routing and connection details can differ under the same brand name.
What is the difference between an open-filter system and an airbox layout?
An open-filter setup is usually easier to access during inspection, while an airbox-style layout can offer tidier engine-bay packaging and a more directed air path. The better choice depends on space, use case and the exact kit design.
What should I check if idle becomes uneven or the intake note changes after fitting?
Check sensor direction, clamp position, any twist in the couplers and all breather or vacuum connections first. Then inspect whether the pipe contacts surrounding trim or nearby parts, and re-check the full system after a short road test.
What should I consider when choosing between Clio RS and Mégane/Scénic applications?
Engine-bay space, routing and sensor layout can differ, so the fitment list matters more than the fact that both are Renault applications. Choose a kit only where the product card clearly lists the compatible model and engine.
What should I inspect after the first test drive?
Check whether any pipe or coupler has shifted, whether clamp position changed and whether the system still clears hot or moving parts. It is also worth listening to idle quality again and looking for witness marks near the pipe ends or joining sections.
