This Fuel Pump & Filter Accessories category collects the small but critical parts that complete a reliable fuel setup: one-way check valves, connectors, wiring solutions and install kits matched to specific pumps.
For full system planning, start from the parent Fuel and Oil System category so fittings, lines and accessories stay compatible across your build.
Use filters by brand and size (for example 8/10/12 mm), sort by price or name, then open the product page to confirm the exact pump/application codes (e.g. GSS). Pick the right accessory and add it to your basket.
Net price: 6 €
Net price: 6 €
Net price: 5 €
Net price: 7 €
Net price: 142 €
Net price: 83 €
Net price: 44 €
Net price: 50 €
Net price: 190 €
Net price: 105 €
Net price: 381 €
Fuel Pump & Filter Accessories – compatible add-ons for stable fuel delivery
Fuel Pump & Filter Accessories are where reliability is often won or lost: the correct connector, proper wiring and the right check valve can make the difference between consistent pressure and frustrating intermittent issues.
Most items here are chosen by compatibility rather than “universal fit”, so always match pump model, line size and listed part numbers on the product page before ordering.
Technical Basics
A pressure retaining (one-way) check valve helps maintain direction of flow and can reduce pressure bleed-down after shutdown; options in this category commonly appear in 8 mm, 10 mm and 12 mm variants.
On the electrical side, higher-demand pumps benefit from robust supply: some kits specify 30 Amp capability and typically reference components such as a relay and circuit breaker for safer, lower-loss power delivery.
There are also pump-specific parts like connector plugs for defined ranges (for example GSS fuel pumps with 22-615 listed), plus dedicated install kits tied to particular pump families (e.g. 255LPH, F90000267, 400-858).
For motorsport plumbing and distribution, you may see AN related accessories such as an AN-12 outlet port, and kits that reference -10 AN / -8 AN components and sealing elements.
Warning: treat every accessory as application-specific and verify fitment details (model code, size, part list) before installation.
Selection Criteria
Choose by task first: for pressure control pick a check valve, for electrical stability consider a hardwire upgrade kit, and for pump swaps look for the correct install kit that matches your exact pump series.
Vehicle-focused install kits should be taken literally: examples include DW100/DW200/DW300 kits listed for Nissan 240sx (S14/S15), Subaru Forester (97–07), Honda Civic (92–00) or Ford Mustang (85–97). Use that listing as your primary compatibility check.
If your setup uses motorsport fittings, confirm the standard and size: look for AN sizes (such as -10 AN) and note whether seals (O-rings) are included where required. Selecting only by hose size without matching the sealing type is a common cause of leaks.
Filter-side accessories (for instance a pump-matched fuel filter or noise-reduction parts) should be selected by the exact pump name and any stated fitment note, not by appearance alone.
Installation & Maintenance
When fitting a check valve, confirm flow direction and match it to your real hose size (e.g. 10 mm) to avoid restriction or seepage. After assembly, pressure-test the system and re-check after a few heat cycles.
For wiring upgrades, focus on safety and voltage stability: use a suitable relay, correct fusing/breaker and secure routing away from heat and abrasion. Only use the specified connector (e.g. 22-615) with proper locking to prevent intermittent pump cut-outs.
Install kits are intended to complete the swap cleanly: small rubber elements and clamps can reduce noise and vibration while keeping the pickup and connections stable. After the first drive, re-check for leaks and ensure the pump sound remains consistent.
FAQ
Q: Which check valve size do I need: 8 mm, 10 mm or 12 mm?
A: Choose the size that matches your fuel hose inner diameter. Measure the line or confirm the spec on your hose/fittings, then select 8/10/12 mm accordingly. A mismatch can cause leaks or unwanted restriction.
Q: What is a hardwire upgrade kit, and when should I use it?
A: A hardwire upgrade improves pump power delivery by reducing voltage drop, which can help at higher load. It is useful if the factory wiring is marginal or the pump demand is higher. Always use proper fusing and a relay.
Q: Which connector should I look for on Walbro GSS pumps?
A: Some products list a dedicated GSS connector with code 22-615. Match it to your exact pump and confirm the product page compatibility before ordering.
Q: How do I pick the right Walbro install kit (255LPH, F90000267, 400-858)?
A: Select by the pump family and the exact code on your pump, such as 255LPH or F90000267. If there are multiple variants, use the item description and part number as the deciding reference.
Q: When do I need a regulator repair kit?
A: If your fuel pressure regulator shows unstable behaviour or leakage symptoms, a repair kit may be appropriate. These kits are typically listed for specific regulator part numbers (for example 13102/13103-type ranges), so compatibility is the key check.
Filter by model code and size, then order the fuel pump and filter accessories that match your setup.
