Key Features & Benefits – EPMAN gold self-adhesive heat reflective foil 1 m × 1.2 m
The EPMAN gold self-adhesive heat reflective foil 1 m × 1.2 m is designed for radiant heat shielding with a gold reflective face. It is made from polymer-laminated fiberglass and remains flexible for shaping over curved panels.
With its self-adhesive backing, it can be applied as a heat barrier under the hood, on firewalls, under-seat areas, and around fuel tank zones when the surface is clean and properly prepared. The stated heat figures are max 450°C continuous and max 1000°C radiant heat.
When is this useful?
It is useful when you want to shield a panel or nearby components from radiant heat and you prefer a heat barrier that can be placed quickly on the target area.
Technical specs
- Product type: Self-adhesive heat reflective foil
- Size: 1 m × 1.2 m
- Material: Polymer-laminated fiberglass
- Surface: Gold reflective
- Radiant heat reflectivity: 80%
- Continuous heat exposure: Max 450°C
- Maximum heat tolerance: 1000°C (radiant heat)
- Part number: EP-WR19GOLD
Selection & installation tips
- Surface prep: Degrease and dry the surface so the adhesive layer bonds evenly.
- Area planning: Mark the protected zone relative to the heat source and leave margin at edges and joints.
- Shaping: Apply gradually over corners and curves to avoid trapped air and creases.
- Heat check: Plan use around the stated 450°C continuous and 1000°C radiant values.
- Edge security: Where airflow or abrasion is expected, pay extra attention to edge seating and protection.
Before application, verify the target surface size, cleanliness, and expected heat exposure, then match them to the sheet size and heat figures listed above.
