Key Features & Benefits – TurboWorks V-band clamp 2.25" / 57 mm
The TurboWorks V-band clamp 2.25" / 57 mm is designed to secure V-band flanges in turbo and exhaust systems. The clamp size is 2.25" (57 mm), intended for matching diameter flanges. :contentReference[oaicite:3]{index=3}
It is made from 304 stainless steel, and the new latch design is built to enable quick clamp removal when access is tight. :contentReference[oaicite:4]{index=4}
When is this useful?
If you frequently service or reconfigure turbo/exhaust connections, the TurboWorks V-band clamp 2.25" / 57 mm helps you get to the joint faster while keeping the flange connection securely clamped. :contentReference[oaicite:5]{index=5}
Technical specs
- Brand: TurboWorks
- Product type: V-band clamp
- Diameter: 2.25" (57 mm)
- Material: 304 stainless steel
- Use: turbo and exhaust systems
- Latch: quick-removal oriented design
- Part number: MG-OP-016
Selection & installation tips
- Diameter match: this clamp is for 2.25" (57 mm) V-band flanges, so measure and match your flange diameter.
- Flange seating: confirm both flanges sit cleanly and evenly, as misalignment can cause leaks.
- Service access: position the clamp so tools can reach the latch and the quick-removal benefit is usable.
- Heat cycling: re-check the joint after heat cycles, as turbo/exhaust expansion can affect seating.
- Post-start inspection: after startup, look for blow-by marks and adjust alignment if needed.
Before fitting, measure diameter, confirm flange seating, and plan access, then compare those parameters to the technical specs above to ensure the clamp matches your turbo or exhaust setup.
