Key Features & Benefits – Stainless steel straight pipe 42 mm 1 m
The Stainless steel straight pipe 42 mm 1 m is a universal SS304A2 stainless steel tube section for building intake and exhaust systems.
With a 42 mm diameter and 1000 mm overall length, the straight form is practical for extensions, repairs, and custom layouts where you choose the connectors and final routing.
When is this useful?
Use it when you need a clean straight section to cut to length and integrate into a custom setup, whether you are fabricating an intake run or assembling an exhaust section around your chosen joints and clearances.
Technical specs
- Form: Straight
- Diameter (D): 42 mm
- Overall length: 1000 mm
- Material: SS304A2 stainless steel
Selection & installation tips
- Diameter check: match the 42 mm diameter to your couplers, clamps, sleeves, flex sections, or flanges.
- Length planning: mark the cut lines after test-fitting, and leave a small margin for final alignment.
- Joint strategy: decide early between welded or clamped connections and select compatible fittings accordingly.
- Clearance check: confirm space around moving parts and nearby components to avoid contact under vibration.
- Dry fit alignment: set the axes and angle during a dry fit, then finalize joints only after the routing is correct.
Before final assembly, verify the key dimensions against your own system and choose connectors to match; compare your required diameter, length, form, and material to the specs listed above.
