Key Features & Benefits – Davies Craig 12 Inch High Power Thermatic electric fan 12V
The Davies Craig 12 Inch High Power Thermatic electric fan 12V is suitable for radiator, A/C condenser and oil cooler cooling. From the factory it is configured for upstream / pusher use; for a puller installation you must flip the fan blade and change the wiring polarity.
Specified performance figures include 1250 CFM airflow and a 22 A maximum current draw at 12 V. With the shroud fitted, overall size is 293 × 293 mm with 86 mm depth, and weight is 1.6 kg, which helps plan installations where space is limited.
When is this useful?
When clearance is tight in front of or behind the radiator, the 86 mm depth and the ability to configure pusher or puller make it easier to place the fan on the available side while keeping airflow through the core.
Technical specs
- Fan diameter: 12 inch (30 cm)
- Operating voltage: 12 V DC
- Airflow: 1250 CFM (2124 m³/hr)
- Maximum current draw: 22 A
- Overall dimensions (with shroud): 293 × 293 mm
- Depth: 86 mm
- Weight: 1.6 kg
- Configuration: pusher/puller (flip blade + reverse polarity)
- What’s included: fan assembly (motor, blade, shroud), mounting feet, installation instructions
- Part number: 0155
Selection & installation tips
- Clearance: measure available space and match it to the 293 × 293 mm footprint and 86 mm depth.
- Choose the layout: decide on pusher or puller; for puller operation the blade must be flipped and wiring polarity changed.
- Electrical load: size wiring, connectors and switching hardware for the 22 A maximum current draw.
- Mounting: position the mounting feet so the shroud sits securely without contacting the radiator core.
- Rotation check: before final fastening, confirm blade rotation matches the marked direction and airflow goes where you need it.
Before fitting, verify your clearance, desired pusher/puller layout and electrical capacity, then match your plan to the dimensions and current draw listed above.
