16-Row British Style Aluminum Oil Cooler Radiator – AN10, Silver

Key Features And Benefits

Aluminium “British Style” Engine/Transmission Oil Cooler, 16 Row, AN10 (EP-OC000016-AN10) is built to help keep oil temperatures under control when heat load increases. During track driving, spirited mountain runs, or heavily loaded setups, oil can overheat and lubrication stability can drop. An external oil cooler is a direct way to support consistent oil performance.

The core uses a stacked-plate design for efficient heat transfer in a compact format. AN10 inlet/outlet ports make sense for higher-flow circuits or builds already based on AN10 hoses and fittings.

Aluminium “British Style” Engine/Transmission Oil Cooler, 16 Row, AN10 in real use

A 16 row AN10 oil cooler is a solid middle-ground when you want extra cooling without the space demand of larger row counts. It’s often easier to package behind a bumper or in a front airflow zone, while still providing meaningful surface area versus smaller options. If you’re searching for a “16 row AN10 oil cooler for universal installation”, this size is a practical starting point with the right adapters and mounting.

Technical Specs

• Construction: aluminium, stacked-plate core
• Rows: 16 rows
• Inlet / outlet: AN10
• Height (B): 155 mm
• Length: 330 mm
• Thickness: 51 mm
• Marked measurement tolerance: ±3 mm
• Part number: EP-OC000016-AN10

Selection And Installation Tips

• Airflow first: mount where it gets clean, direct airflow and avoid heat-soak from hot components.
• AN10 consistency: keep hose and fittings truly AN10 and confirm the sealing style used in your system.
• Thermostatic control: for street builds, a thermostat solution is commonly used to avoid overcooling when oil is cold.
• Protect the lines: route hoses away from sharp edges, moving parts, and exhaust heat; add shielding where needed.
• Mounting: use vibration-resistant brackets and leave enough slack so the hoses are not under tension.

Compatibility And Part Number

• Compatible part number: EP-OC000016-AN10
• Fitment: universal installation for engine oil or transmission oil cooling with the correct adapters and hose routing

Tell us whether you’re cooling engine oil or transmission oil and what adapters/thermostat you plan to use. We can help you sanity-check sizing and mounting location.