The Airride Tanks and Holders category covers the air reservoirs and brackets that store and support compressed air in your system. You can choose between steel and aluminium brushed air tanks from 10 to 40 litres, with diameters like 206, 246 and 276 mm matched to dedicated tank brackets. Prestige-style holders and standard clamps allow both discreet mounting and show-style installs, so your airride tank can be safe and good-looking at the same time.
Airride tanks and holders – stable pressure and clean installation
Airride Tanks and Holders are responsible for storing compressed air and securing the reservoir safely inside the vehicle. The range includes air tanks from 10 to 40 litres in various lengths and diameters, so you can build compact boot layouts or larger show-style setups. Robust steel tanks sit alongside lightweight aluminium brushed versions that reduce weight and add visual appeal. Matching brackets and clamps ensure vibration-free, secure mounting, which is essential if you want a leak-free, long-lasting air suspension system.
Different diameters – typically 206, 246 and 276 mm – are available with corresponding tank brackets that wrap the curved body properly instead of applying point loads. Prestige holders not only secure the tank mechanically but also act as visual highlights, especially in glassed-in or open boot builds. Multiple threaded ports on the tanks allow flexible placement of the compressor feed, pressure switch, safety valve and drain fittings. Warning: saving on brackets or fasteners is a false economy – a poorly secured tank can become a serious safety hazard in a crash or heavy braking.
Technical Basics
Purpose-built airride tanks are made from thick-wall steel or aluminium and are pressure-tested for automotive use. Sizes around 10, 11, 15, 19, 20, 30 and 40 litres are offered with different diameters (for example 206 mm, 246 mm, 276 mm) and lengths so they can be mounted in the boot, spare wheel well or even under the chassis. Multiple threaded ports make it easy to connect gauges, pressure switches and safety valves where they are easiest to access. Aluminium brushed tanks offer lower weight, high corrosion resistance and a clean, show-ready look straight out of the box.
Dedicated tank holders and clamps are designed for specific diameters, giving large contact surfaces and helping to isolate vibration. Prestige brackets often include shaped inner profiles or rubber inserts that prevent the tank from rotating or rattling under load. Correctly chosen brackets also protect the pressure-tested shell from dents and localised stress that could reduce its service life. Warning: improvised clamps made from thin strip or generic hardware may not hold the tank securely enough when it is full and under pressure.
Selection Criteria
Choosing the right air tank starts with how intensively you use the system and how fast you want it to recover. Larger tanks – for example 20–40 litres – store more air so you can perform more height changes before the compressor has to run again, but they take up more space and take longer to fill. Smaller 10–15 litre tanks are easier to package and refill faster but offer less reserve for back-to-back adjustments. Matching tank volume to compressor output is key to avoiding excessive run time and heat build-up.
Think carefully about where you will mount the tank: in the boot, spare wheel well or perhaps on display in a show install. For visible locations, aluminium brushed tanks are popular for their clean finish, while hidden installs can use rugged steel units without compromise. Tank bracket choice should match the tank diameter (206, 246 or 276 mm) and planned mounting points on the chassis or body. Warning: do not select brackets or tank size purely on price – an undersized holder or poorly placed tank may cause noise, damage or even failure later on.
Installation & Maintenance
When installing Airride tanks and holders, mechanical stability is the top priority. Always mount the tank to strong structural areas such as boot floors, cross-members or frame rails that can handle the loads. Use the correct clamps and hardware, tighten them with a torque wrench where possible and consider locking nuts or threadlocker to prevent loosening. Make sure there is adequate clearance around the tank for fittings and air lines, and that nothing sharp touches the shell.
For maintenance, periodically check the mounting hardware for tightness, especially if you drive on rough roads or load the vehicle heavily. Inspect the tank surface for corrosion, dents or damage and test for leaks at fittings with soapy water. Any significant rust, deep dents or suspicious marks on the shell should be treated as a reason to investigate and, if necessary, replace the tank. Warning: continuing to use a damaged air tank is unsafe – replacement is far cheaper than dealing with a failure under pressure.
FAQ
What size air tank do I need for my airride system?
The ideal tank size depends on how often you adjust ride height and how fast you want the system to recover. For typical daily driving, a 15–20 litre tank is a good compromise between space and performance. Show cars or very active setups may benefit from 30–40 litres to reduce compressor cycling.
What is the difference between steel and aluminium air tanks?
Steel airride tanks are generally heavier but perfectly suitable for hidden or underbody installs. Aluminium brushed tanks save weight, resist corrosion better and look more refined, which is why they are popular in visible boot builds. Pricing is usually higher for aluminium due to material and manufacturing costs.
Do I really need dedicated brackets for my tank?
Yes, using proper tank brackets matched to the reservoir diameter is strongly recommended. They spread the load over a wider area, reduce vibration and keep the tank firmly in place even when full and under pressure. Generic or improvised clamps often loosen over time or mark the tank surface.
Where is the best place to mount an air tank in a car?
The most common location is the boot, either on the floor, against the back seat or in the spare wheel well. The chosen position should offer strong mounting points and allow clean routing of airlines and wiring. For show builds, you might place the tank prominently on display, but safety and secure mounting must always come first.
How should I maintain my air tank and holders?
Regularly inspect the air tank and brackets for corrosion, cracks, dents or loose fasteners. Check fittings and ports for leaks using a soapy water spray while the system is pressurised. If you notice any significant damage or heavy rust, replacing the tank is the safest option to avoid pressure-related failures.
